This is an old revision of the document!
Periodic inspection and cleaning are more than acceptable with this pistol. The Walther PPQ M2 has a tenifer coating on its metal parts to prevent corrosion…and it works. Durability is a big component in my choice of a pistol. Tactical nerds who carry 87 rounds in their fanny packs will argue that several spare magazines are better than my single magazine in a defensive situation. Capacity is another consideration for me when selecting a pistol. I drew on my experience with that pistol in evaluating the Walther, which is why I can confidently recommend the Walther in terms of reliabilit
It wasn’t a Walther, but it was a good example of what a defense pistol should be. If a pistol isn’t reliable, I have no use for it. Reliability is my first requirement for a pistol. With a high density plastic frame and an incredibly tough tenifer finish on the metal parts it doesn’t lack durability. Now that I have your attention let’s look at what the Walther PPQ doesn’t lac
Whether I carry a pistol in my waistband, in my glovebox or in my overnight bag on a hunting trip, I only own pistols for one reason – defense. There’s another area where the Walther blows most pistols out of the water, but you’ll have to make it to the end of this article to find out what it is. At 15 rounds it doesn’t lack capacity. Plastic framed guns are what we’re talking about here! While I feel this is the natural evolution of the striker-fired sidearms, I would love to see how well the PPQ’s hold up after another ten years of hard use. The point of impact is above the front sight on the .22 model, a matter which has thrown me for quite the loop for the first couple of range session
He schooled me on the proper way to operate the Walther's unusual magazine release by using the middle finger of my shooting hand. Using your trigger finger to drop the mag, because of the angle, results in your finger pressing against the side of the trigger as well as the magazine release—very not good. Unlike traditional American designs, the PPQ's magazine release is a sizable ambidextrous lever on either side of the trigger guard. I obtained a 9mm model, which comes with two 15-round magazines and three sizes of interchangeable backstraps, with the medium-size one installed on the gun at the factory. One final point of consideration is how well these pistols will hold up with time, use, and exposure to the elements. There’s the PPQ M1, or what they now call the PPQ Classic, which uses a European style paddle magazine release that’s fully ambidextrous right out of the box. The Range Hou
My test pistol had the same excellent trigger as the one I tried at the gun store. Unfortunately, the engineers at Walther took a page out of the Glock design book, as the PPQ comes with polymer 3-dot sights. The ergonomics and controls are all the same, but the 22 model does not have a removable back panel. The point of impact is above the front sight on the .22 model, a matter which has thrown me for quite the loop for the first couple of range sessions. There’s a spring-loaded plunger and a small click-adjustable screw for windage and the rear sight falls right ou
Nothing is perfect and the PPQ does have its share of ‘ehs,’ but it’s not a big list and it’s mostly matters of personal preference. There’s also a pistol called the ‘Creed’ which has similar frame ergonomics to the PPQ, but it is a completely different breed. The Sub-Compact holds 10 rounds in a flush fit mag but will accept any of the larger capacity mags. The PPQ 22 can be had with 10 or 12 round mags, both flush-fitting. They can be had with 4″ or 5″ barrels (4.2″ for the .40 models and 4.25″ for the .45) or a 4.6″ threaded barrel. There’s the PPQ SC, their sub-compact model with a greatly reduced Walther ppq 9mm for sale grip length and half an inch shaved off of the standard 4″ barrels. Guns & Ammo It really is quite easy, even if you try to remove the sight from the wrong direction like I had. The front can be replaced with a Glock front sight hex driver while the back can be swapped out with a small screwdriver. To me the polymer ones feel flimsy and I do question their long term reliability. I’m not a big fan of the captive polymer recoil sprin
The trigger on this pistol is so fantastic that it’s the foundation for the very name of the series. All I had to do with the M2 version was switch out one of the magazine releases and I had a mirrored pair of nine millimeters. Not all ambi pistols have full ambi controls, nor are they all built where the controls on the left side are the same as on the righ
Nothing is perfect and the PPQ does have its share of ‘ehs,’ but it’s not a big list and it’s mostly matters of personal preference. There’s also a pistol called the ‘Creed’ which has similar frame ergonomics to the PPQ, but Walther ppq 9mm for sale it is a completely different breed. The Sub-Compact holds 10 rounds in a flush fit mag but will accept any of the larger capacity mags. The PPQ 22 can be had with 10 or 12 round mags, both flush-fitting. They can be had with 4″ or 5″ barrels (4.2″ for the .40 models and 4.25″ for the .45) or a 4.6″ threaded barrel. There’s the PPQ SC, their sub-compact model with a greatly reduced grip length and half an inch shaved off of the standard 4″ barrels. Guns & Ammo Carry
Edit this page