| Both sides previous revisionPrevious revisionNext revision | Previous revision |
| walther_ppq_m2_review [2026/02/25 16:58] – created tatianaschreiber | walther_ppq_m2_review [2026/02/27 06:45] (current) – created velmahodgson |
|---|
| There are several different versions of this pistol currently available. Some models can be found in various Cerakote finishes too. These grips feel so natural and fit my hands so exactly with the medium back panel that I can’t think of anything I would want change | Get a Full Yearof Guns & Ammo& Digital Access. |
| | My test pistol had the same excellent trigger as the one I tried at the gun store. Unfortunately, the engineers at Walther took a page out of https://darkpistols.com the Glock design book, as the PPQ comes with polymer 3-dot sights. The ergonomics and controls are all the same, but the 22 model does not have a removable back panel. The point of impact is above the front sight on the .22 model, a matter which has thrown me for quite the loop for the first couple of range sessions. There’s a spring-loaded plunger and a small click-adjustable screw for windage and the rear sight falls right out. |
| | Guns & Ammo Carry #1 |
| | Some sights have been reported to change the point of aim but I’ve outfitted both of mine with Trijicon three dot night sights originally made for the P99 and they’ve been dead-on. There’s no divot to protect the paint and I’ve personally had some of these sights get beat up in short order. Most of the PPQ’s come with some really flimsy sights which have three white dots painted right https://darkpistols.com on the trailing edge. All of the newer pistols feature polygonal rifling, though I have seen an earlier M2 with more traditional land and groove rifling. The Q4 Tac comes standard with a threaded barrel, an adjustable rear sight and fiber optic front sight and is complete with an optic mount. Pull the slide back slightly then pull down on a tab just in front of the trigge |
| |
| | Walther PPQ M2 Review |
| | There’s some easy take-up before it reaches a notable stop then it’s just a little bit further to the break. Whatever engineering feat Walther undertook to create this trigger had been worth the troubl |
| |
| I own one of these as well and to be honest it’s given me a lot of trouble. It really is quite easy, even if you try to remove the sight from the wrong direction like I had. There’s a spring-loaded plunger and a small click-adjustable screw for windage and the rear sight falls right out. The front can be replaced with a Glock front sight hex driver while the back can be swapped out with a small screwdriver. | Long-Distance Handgun Shooting: How and Why to Take a Long Shot |
| I don’t know how they did it, and I really don’t care, but the Walther’s trigger is leaps and bounds ahead of the pistol I carried in the field. Striker-fired pistols have always had one drawback; the trigger. In the accuracy department, the Walther PPQ M2 should outperform most pistols in its class. The sights won’t rust because they’re polymer as is the pistol’s frame so nothing to really worry about there. In the field [[https://darkpistols.com/top-10-most-reliable-and-popular-pistols-for-sale-this-year/|Walther PPQ M2]] I carried a polymer framed duty pistol for nine years. | To use your shooting hand thumb you have to turn the gun completely sideways in your hand, almost pointing the muzzle back at yourself—not good. The ambidextrous slide release is surprisingly long but not overly bulky. The front of the square trigger guard has similar horizontal serrations, https://darkpistols.com and the top of the slide is serrated to reduce glar |
| Walther PPQ M2 Revi | |
| |
| |
| It wasn’t a Walther, but it was a good example of what a defense pistol should be. If a pistol isn’t reliable, I have no use for it. Reliability is my first requirement for a pistol. With a high density plastic frame and an incredibly tough tenifer finish on the metal parts it doesn’t lack durability. Now that I have your attention let’s look at what the Walther PPQ doesn’t lac | I own one of these as well and to be honest it’s given me a lot of trouble. It really is quite easy, even if you try to remove the sight from the wrong direction like I had. There’s a spring-loaded plunger and a small click-adjustable screw for windage and the rear sight falls right out. The front can be replaced with a Glock front sight hex driver while the back can be swapped out with a small screwdrive |
| |
| About the Author: Jess- Range Team Member | |
| Smith & Wesson is chambering its excellent M&P 2.0 pistol in 10mm Auto, and the result is a gun with high capacity and enough Here is what handgun hunters ca It also forces you to get your finger off the trigger during mag changes, which is a good habit to get into. While this sounds awkward and slow, in actuality I found it was nearly as quick as hitting a traditional mag release with my thumb, and probably with practice it would be just as fas | |
| |
| | Handguns Editor Scott Rupp talks to Crossbreed Rep Nathan Engelking about the body-hugging Rogue Holster and Holster System w Handguns Editor Scott Rupp and Aaron Oelger from Hodgdon Powder Company discuss powder availability and new Winchester StaBAL Handguns Editor Scott Rupp talks with Streamlight Rep Brian Osborn about Wedge updates, including tail cap switch and water |
| |
| The Q4 Tac comes standard with a threaded barrel, an adjustable rear sight and fiber optic front sight and is complete with an optic mount. There’s the PPQ SC, their sub-compact model with a greatly reduced grip length and half an inch shaved off of the standard 4″ barrels. For those who prefer a thumb button style mag release there is the PPQ M2 model, which can easily be switched out for left or right handed us | |
| |
| | Some sights have been reported to change the point of aim but I’ve outfitted both of mine with Trijicon three dot night sights originally made for the P99 and they’ve been dead-on. On the upside sights for the Walther P99 will fit the PPQ’s and they are by far the easiest sights [[https://darkpistols.com/choosing-between-compact-and-full-size-pistols-whats-best-for-you-in-2025/|https://darkpistols.com]] to replace on any handgun I have ever seen. There’s no divot to protect the paint and I’ve personally had some of these sights get beat up in short order. Most of the PPQ’s come with some really flimsy sights which have three white dots painted right on the trailing edge. All of the newer pistols feature polygonal rifling, though I have seen an earlier M2 with more traditional land and groove rifling. After putting hundreds of rounds through other guns I am still completely floored when I go back to shooting a PP |
| |
| Handguns Editor Scott Rupp talks with S&W Rep Vince Perreault about how the Tempo Barrell System manages these quick cartridg Well, luckily for me that gun store employee is a big Walther fan, and as an Iraq combat veteran he knows the how important it is to be able to manipulate your weapon quickly. The PPQ's slide features flat-bottomed serrations fore and aft that provide a very good gripping surface. The rear is adjustable for windage. With a four-inch barrel and an overall length of 7.1 inches, the Walther PPQ is roughly the size and weight (24.5 oz) of a Glock 17 but with a better trigger. The grip feels small for its capacity, and I think this impression is helped by the profile of the slide, which narrows at the to | |
| |
| | The trigger itself has a safety lever in the center ala Glock (to prevent against accidental discharges if dropped), and the pistol has a firing pin block safety as well. I walked into my local gun store to use the range, and an employee said to me, "Hey, have you checked out the new striker-fired Walther? It has the best factory trigger of any striker-fired gun I've ever shot." From time to time I am introduced to a new pistol design at some invitation-only, pre-production rollout event. I sincerely hope that these guns see an increase in third party support as they absolutely deserve the recognition. The predecessor to the PPQ 22 is the P22, a pistol which seems to have a mixed history of its own. I own one of these as well and to be honest it’s given me a lot of troubl |
| |
| He schooled me on the proper way to operate the Walther's unusual magazine release by using the middle finger of my shooting hand. Using your trigger finger to drop the mag, because of the angle, results in your finger pressing against the side of the trigger as well as the magazine release—very not good. Unlike traditional American designs, the PPQ's magazine release is a sizable ambidextrous lever on either side of the trigger guard. I obtained a 9mm model, which comes with two 15-round magazines and three sizes of interchangeable backstraps, with the medium-size one installed on the gun at the factory. One final point of consideration is how well these pistols will hold up with time, use, and exposure to the elements. There’s the PPQ M1, Walther PPQ M2 or what they now call the PPQ Classic, which uses a European style paddle magazine release that’s fully ambidextrous right out of the box. | |
| THE MAGAZINE | |
| To use your shooting hand thumb you have to turn the gun completely sideways in your hand, almost pointing the muzzle back at yourself—not good. The ambidextrous slide release is surprisingly long but not overly bulky. The front of the square trigger guard has similar horizontal serrations, and the top of the slide is serrated to reduce glar | |
| |
| | To me the polymer ones feel flimsy and I do question their long term reliability. I’m not a big fan of the captive polymer recoil spring. Nothing is perfect and the PPQ does have its share of ‘ehs,’ but it’s not a big list and it’s mostly matters of personal preference. There’s also a pistol called the ‘Creed’ which has similar frame ergonomics to the PPQ, but it is a completely different breed. The Sub-Compact holds 10 rounds in a flush fit mag but will accept any of the larger capacity mags. https://darkpistols.com They can be had with 4″ or 5″ barrels (4.2″ for the .40 models and 4.25″ for the .45) or a 4.6″ threaded barre |
| The trigger itself has a safety lever in the center ala Glock (to prevent against accidental discharges if dropped), and the pistol has a firing pin block safety as well. I walked into my local gun store to use the range, and an employee said to me, "Hey, have you checked out the new striker-fired Walther? It has the best factory trigger Walther PPQ M2 of any striker-fired gun I've ever shot." From time to time I am introduced to a new pistol design at some invitation-only, pre-production rollout event. I sincerely hope that these guns see an increase in third party support as they absolutely deserve the recognition. The predecessor to the PPQ 22 is the P22, a pistol which seems to have a mixed history of its own. I own one of these as well and to be honest it’s given me a lot of trouble. | |
| Guns & Ammo | |
| Some sights have been reported to change the point of aim but I’ve outfitted both of mine with Trijicon three dot night sights originally made for the P99 and they’ve been dead-on. There’s no divot to protect the paint and I’ve personally had some of these sights get beat up in short order. Most of the PPQ’s come with some really flimsy sights which have three white dots painted right on the trailing edge. All of the newer pistols feature polygonal rifling, though I have seen an earlier M2 with more traditional land and groove rifling. The Q4 Tac comes standard with a threaded barrel, an adjustable rear sight and fiber optic front sight and is complete with an optic mount. Pull the slide back slightly then pull down on a tab just in front of the trigge | |
