Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
walther_ppq_m2_review [2026/02/27 15:36] – created gabriellestclairwalther_ppq_m2_review [2026/02/27 16:40] (current) – created lillievallery
Line 1: Line 1:
-Some sights have been reported to change the point of aim but I’ve outfitted both of mine with Trijicon three dot night sights originally made for the P99 and they’ve been dead-on. On the upside sights for the Walther P99 will fit the PPQ’s and they are by far the easiest sights to replace on any handgun I have ever seen. There’s no divot to protect the paint and I’ve personally had some of these sights get beat up in short order. Most of the PPQ’s come with some really flimsy sights which have three white dots painted right on the trailing edge. All of the newer pistols feature polygonal rifling, though I have seen an earlier M2 with more traditional land and groove rifling. After putting hundreds of rounds through other guns I am still completely floored when I go back to shooting a PP+For as many polymer framed and/or striker-fired pistols are currently Walther ppq 9mm for sale on the market (and there are quite a few!) there is one model which I would give the crown to, hands down and no questions asked. It’s not just a good trigger for a polymer striker-fired pistol, it’s just a really freaking good trigger. Because of the difference in engineering the striker pistols just won’t ever have the same clean feel at the trigger as a hammer-fired weapon. Striker-fired polymer framed pistols…they’re everywher
  
 +The Q4 and Q5 models are spared from the ‘low-end’ windage adjustable only sights and Walther’s website has a version of the M2 listed with ‘W/XS F8 night sights’ which look to be a major improvemen
  
-It really is quite easy, even if you try to remove the sight from the wrong direction like I had. The front can be replaced with a Glock front sight hex driver while the back can be swapped out with a small screwdriver. To me the polymer ones feel flimsy and I do question their long term reliability. I’m not a big fan of the captive polymer recoil Walther PPQ M2 sprin 
  
 +Nothing is perfect and the PPQ does have its share of ‘ehs,’ but it’s not a big list and it’s mostly matters of personal preference. There’s also a pistol called the ‘Creed’ which has similar frame ergonomics to the PPQ, but [[https://swfconsultinggroup.com/question/review-walther-ppq/|Walther ppq 9mm for sale]] it is a completely different breed. The Sub-Compact holds 10 rounds in a flush fit mag but will accept any of the larger capacity mags. The PPQ 22 can be had with 10 or 12 round mags, both flush-fitting. They can be had with 4″ or 5″ barrels (4.2″ for the .40 models and 4.25″ for the .45) or a 4.6″ threaded barrel. There’s the PPQ SC, their sub-compact model with a greatly reduced grip length and half an inch shaved off of the standard 4″ barrels.
 +Guns & Ammo Carry 
  
-The trigger itself has a safety lever in the center ala Glock (to prevent against accidental discharges if dropped), and the pistol has a firing pin block safety as well. I walked into my local gun store to use the range, and an employee said to me, "Hey, have you checked out the new striker-fired Walther?  It has the best factory trigger of any striker-fired gun I've Walther PPQ M2 ever shot." From time to time I am introduced to a new pistol design at some invitation-only, pre-production rollout event. I sincerely hope that these guns see an increase in third party support as they absolutely deserve the recognition. The predecessor to the PPQ 22 is the P22, a pistol which seems to have a mixed history of its own. I own one of these as well and to be honest it’s given me a lot of troubl 
  
 +My test pistol had the same excellent trigger as the one I tried at the gun store. Unfortunately, the engineers at Walther took a page out of the Glock design book, as the PPQ comes with polymer 3-dot sights. The ergonomics and controls are all the same, but the 22 model does not have a removable back panel. The point of impact is above the front sight on the .22 model, a matter which has thrown me for quite the loop for the first couple of range sessions. There’s a spring-loaded plunger and a small click-adjustable screw for windage and the rear sight falls right out.
 +The Range Hou
  
-Some sights have been reported to change the point of aim but I’ve outfitted both Walther PPQ M2 of mine with Trijicon three dot night sights originally made for the P99 and they’ve been dead-on. There’s no divot to protect the paint and I’ve personally had some of these sights get beat up in short order. Most of the PPQ’s come with some really flimsy sights which have three white dots painted right on the trailing edge. All of the newer pistols feature polygonal rifling, though I have seen an earlier M2 with more traditional land and groove rifling. The Q4 Tac comes standard with a threaded barrel, an adjustable rear sight and fiber optic front sight and is complete with an optic mount. Pull the slide back slightly then pull down on a tab just in front of the trigge 
  
 +Whether I carry a pistol in my waistband, in my glovebox or in my overnight bag on a hunting trip, I only own pistols for one reason ­– defense. There’s another area where the Walther blows most pistols out of the water, but you’ll have to make it to the end of this article to find out what it is. At 15 rounds Walther ppq 9mm for sale it doesn’t lack capacity. Plastic framed guns are what we’re talking about here! While I feel this is the natural evolution of the striker-fired sidearms, I would love to see how well the PPQ’s hold up after another ten years of hard use. The point of impact is above the front sight on the .22 model, a matter which has thrown me for quite the loop for the first couple of range session
  
-Not all ambi pistols have full ambi controls, nor are they all built where the controls on the left side are the same as on the right. I had been searching the market for some time for a proper ambidextrous nine millimeter pistol. After seeing the groupings I knew that I had to have one of these pistols. With a street price of $459.00 (EuroOptic.com) the pistol is an incredible value for a German-made product. It’s built to last a lifetime with minimal care, and it should be comfortable for anyone to shoo 
  
 +It really is quite easy, even if you try to remove the sight from the wrong direction like I had. The front can be replaced with a Glock front sight hex driver while the back can be swapped out with a small screwdriver. To me the polymer ones feel flimsy and I do question their long term reliability. I’m not a big fan of the captive polymer recoil sprin
  
-Some sights have been reported to change the point of aim but I’ve outfitted both of mine with Trijicon three dot night sights originally made for the P99 and they’ve been dead-on. There’s no divot to protect the paint and I’ve personally had some of these sights get beat up in short order. Most of the PPQ’s come with some really flimsy sights which have three white dots [[https://darkpistols.com/handguns-for-sale-2025-the-ultimate-guide-to-selecting-the-perfect-pistol-for-your-needs/|Walther PPQ M2]] painted right on the trailing edge. All of the newer pistols feature polygonal rifling, though I have seen an earlier M2 with more traditional land and groove rifling. The Q4 Tac comes standard with a threaded barrel, an adjustable rear sight and fiber optic front sight and is complete with an optic mount. Pull the slide back slightly then pull down on a tab just in front of the trigger. 
-The Range Hou 
  
 +It wasn’t a Walther, but it was a good example of what a defense pistol should be. If a pistol isn’t reliable, I have no use for it. Reliability is my first requirement for a pistol. With a high density plastic frame and an incredibly tough tenifer finish on the metal parts it doesn’t lack durability. Now that I have your attention let’s look at what Walther ppq 9mm for sale the Walther PPQ doesn’t lac
  
-Handguns Editor Scott Rupp talks to Crossbreed Rep Nathan Engelking about the body-hugging Rogue Holster and Holster System w Handguns Editor Scott Rupp and Aaron Oelger from Hodgdon Powder Company discuss powder availability and new Winchester StaBAL Handguns Editor Scott Rupp talks with Streamlight Rep Brian Osborn about Wedge updates, including tail cap switch and water+ 
 +You’re probably old enough to still prefer a steel framed gun. And let’s go ahead and call a spade a spade; polymer means plastic. I would encourage anyone from new shooters to experienced to give one a try here with us at the Range of Richfield. I sincerely hope that these guns see an increase in Walther ppq 9mm for sale third party support as they absolutely deserve the recognition. The predecessor to the PPQ 22 is the P22, a pistol which seems to have a mixed history of its own. The ergonomics and controls are all the same, but the 22 model does not have a removable back panel. 
 +Sidearms For Sportsmen: Walther PPQ M2 Revi 
 + 
 + 
 +After putting hundreds of rounds through other guns I am still completely floored when I go back to shooting a PPQ. From there it’s right back to needing just that teeny bit of encouragement to fire again. The reset is so short that by the time you can think about it the darn thing’s already clicked back into place with a tactile and audible report. There’s some easy take-up before it reaches a notable stop then it’s just a little bit further to the break. It is what every striker-fired pistol strives to be. 
 +The Range Hou
  
  
-Handguns Editor Scott Rupp talks with S&W Rep Vince Perreault about how the Tempo Barrell System manages these quick cartridg Well, luckily for me that gun store employee is a big Walther fan, and as an Iraq combat veteran he knows the how important it is to be able to manipulate your weapon quickly. The PPQ's slide features flat-bottomed serrations fore and aft that provide a very good gripping surface. The rear is adjustable for windage. With a four-inch barrel and an overall length of 7.1 inches, the Walther PPQ is roughly the size and weight (24.5 oz) of a Glock 17 but with a better trigger. The grip feels small for its capacity, and I think this impression is helped by the profile of the slide, which narrows at the to+Then there are the polymer sights which come standard on most of the models. Last is the Q5 Match, a slightly tweaked 5″ barreled model which also has adjustable sights and is optic ready and features a distinct blue trigger and lightening cuts within the slide. If there’s a problem, I’ll inform you but I’m not evaluating these guns for extreme accuracy. With a lot of our time spent in a saltwater environment we discovered the sights would rust. The polymer pistol I carried in the field had one small Achilles heel that we quickly discovered. Because of its high-quality Walther barrel and the ultra-smooth Quick Defense Trigger this pistol most definitely does not lack accuracy. 
 +Walther PPQ M2 Revi