| Both sides previous revisionPrevious revisionNext revision | Previous revision |
| the_heart_of_the_internet [2026/02/26 11:54] – created maurice5722 | the_heart_of_the_internet [2026/02/27 00:33] (current) – created jeanettecrutchfi |
|---|
| Nothing is perfect and the PPQ does have its share of ‘ehs,’ but it’s not a big list and it’s mostly matters of personal preference. There’s also a pistol called the ‘Creed’ which has similar frame ergonomics to the PPQ, but it is a completely different breed. The Sub-Compact holds 10 rounds in a flush fit mag but will accept any of the larger capacity mags. The PPQ 22 can be had with 10 or 12 round mags, both flush-fitting. They can be had with 4″ or 5″ barrels (4.2″ for the .40 models and 4.25″ for the .45) or a 4.6″ threaded barrel. There’s the PPQ SC, their sub-compact model with a greatly reduced darkpistols.com grip length and half an inch shaved off of the standard 4″ barrels. | I have also spent time with it disassembled, getting familiar with the internal changes and issues with parts replacement (since Glocks are fun hobby kits). I’ve run it for static precision and in dynamic defensive drills from concealment, with and without a light attached to the rail. For this Glock 19 review, I’ve been using my Gen 5 since late August and have put roughly 4,000 rounds through it since. Roughly seven years later we’re presented with the next generation in Glock’s lineup. I’ll probably look into a gen 3 and building it out to how I wan |
| Guns & Ammo | |
| The trigger on this pistol is so fantastic that it’s the foundation for the very name of the series. All I had to do with the M2 version was switch out one of the magazine releases and I had a mirrored pair of nine millimeters. Not all ambi pistols have full ambi controls, nor are they all built where the controls on the left side are the same as on the righ | |
| |
| | ALL PISTOLS |
| | However, magazines designed for compact and subcompact models will not function in larger pistols because they are not tall enough to reach the slide and magazine release. The Gen 1 frame pattern and design was used by Glock from 1982 through 1988 and pre-dates the checkered grip patterns used in the second generation of Glock pistols. "Subcompact" models are designed for easier carry and being lighter and shorter, are intended to be used with two fingers on the grip below the trigger glock 19 for sale guard and lack an accessory rail like the larger, after generation two, Glock models. Glock magazines are interchangeable between models of the same caliber, meaning that a compact or subcompact pistol will accept magazines designed for the larger pistols chambered for the same round. |
| | First-generation models |
| | The first of these are the "long slide" models, which were too long for certain IPSC classes, necessitating the creation of the intermediate "competition" glock 19 for sale models. Additionally, many law enforcement agencies had the department name, logo, or badges engraved on the slides of issued duty weapons. In addition to the standard nonadjustable polymer sight line, three alternative sight lines are offered by Glock. They feature additional openings that allow liquids to flow and escape around them, offering enhanced reliability when water has penetrated into the firing pin assembly channel. The first Glock pistols sent to the United States in 1985 failed to meet the BATF import "points" requirement, requiring Glock to quickly develop an adjustable rear sight which allowed for the pistols to be imported and sold commercially in 198 |
| |
| The trigger on this pistol is so fantastic that it’s the foundation for the very name of the series. The Walther PPQ M2 is a "definite buy" for someone looking for a reliable, accurate, capable and durable defensive pistol. This can affect the accuracy of a pistol, but it shouldn’t prevent a shooter from being, at the very least, practically accurate. The rest of the firearm resisted the elements pretty well but the sights, we found, were not coated. I want something I don’t need to wipe down with oil every time I handle it. Since [[https://darkpistols.com/product/walther-ppq-m2-for-sale/|darkpistols.com]] I’m no longer "on the job," I’ll tell you that I don’t carry a spare magazine on me when I carry a pisto | |
| |
| | The polymer frames of third-generation models can be black, flat dark earth, or olive drab. Glock pistols with these upgrades are informally referred to as (early) "third-generation" models. These versions, introduced in 1988, were informally referred to as "second-generation" or Gen2 models, though Glock did not mark the pistols Gen |
| |
| |
| | The earliest Glock boxes had ammunition storage compartments that allowed for 17 rounds of 9mm to be stored with the pistol. In 1985, after joint Norwegian and Swedish trials from 1983 to 1985, the Glock 17 was accepted into service as the P80 in Norway, and in 1988 as the Pistol 88 in Sweden, where it surpassed all prior NATO durability standards. Glock was then invited to participate in the XM9 Personal Defense Pistol Trials, but declined because the DOD specifications would require extensive retooling of production equipment and providing 35 test samples in an unrealistic time fram |
| |
| Some sights have been reported to change the point of aim but I’ve outfitted both of mine with Trijicon three dot night sights originally made for the P99 and they’ve been dead-on. On the upside sights for the Walther P99 will fit the PPQ’s and they are by far the easiest sights to replace on any handgun I have ever seen. There’s no divot to protect the paint and I’ve personally had some of these sights get beat up in short order. Most of the PPQ’s come with some really flimsy sights which have three white dots painted right on the trailing edge. All darkpistols.com of the newer pistols feature polygonal rifling, though I have seen an earlier M2 with more traditional land and groove rifling. After putting hundreds of rounds through other guns I am still completely floored when I go back to shooting a PP | Fifth-generation models |
| | Also, in 2007, Glock introduced a "short frame" version of these large frame weapons to provide a grip better suited to small glock 19 for sale hands. These come in only "standard", "subcompact", "competition" (.45 ACP only), and "long slide" (10mm only). Additionally, .357 SIG and .45 GAP chamberings are offered in "standard", "compact", and "subcompact" models, while .380 ACP is offered only in "compact" and "sub-compact" model |
| |
| |
| He schooled me on the proper way to operate the Walther's unusual magazine release by using the middle finger of my shooting hand. Using your trigger finger to drop the mag, because of the angle, results in your finger pressing against the side of the trigger as well as the magazine release—very not good. Unlike traditional American designs, the PPQ's magazine release is a sizable ambidextrous lever on either side of the trigger guard. I obtained a 9mm model, which comes with two 15-round magazines and three sizes of interchangeable backstraps, with the medium-size one installed on the gun at the factory. One final point of consideration is how well these pistols will hold up with time, use, and exposure to the elements. There’s the PPQ M1, or what they now call the PPQ Classic, which uses a European style paddle magazine release that’s fully ambidextrous right out of the bo | All three safeties disengage sequentially as the trigger is pulled and automatically re-engage when the trigger is released. The G19 pistol glock 19 for sale features a compact glock 19 for sale design with a 15 round magazine capacity, making it a popular choice for a variety of uses from everyday carry to professional use. Cleaning and maintaining your pistol is key to keeping glock 19 for sale it in good operating conditio |
| |
| |
| Some sights have been reported to change the point of aim but I’ve outfitted both of mine with Trijicon three dot night sights originally made for the P99 and they’ve been dead-on. There’s no divot to protect the paint and I’ve personally had some of these sights get beat up in short order. Most of the PPQ’s come with some really flimsy sights which have three white dots painted right on the trailing edge. All of the newer pistols feature polygonal rifling, though I have seen an earlier M2 with more traditional land and groove rifling. The Q4 Tac comes standard with a threaded barrel, an adjustable rear sight and fiber optic front sight and is complete with an optic mount. Pull the slide back slightly then pull down on a tab just in front of the trigge | The British preferred the Glock 17 Gen 4 over the Beretta Px4 Storm, FN FNP, Heckler & Koch P30, SIG Sauer P226, Smith & Wesson M&P, and Steyr M9A1 of which 19 pistols each, all chambered in 9×19 mm Parabellum, were entered in the R9GSP trials. Starting in 2013, the British Armed Forces began replacing the Browning Hi-Power pistol with the Glock 17 Gen 4, due to concerns about weight and the external safety of the Hi-Power. By 1992, some 350,000 pistols had been sold in more than 45 countries, including 250,000 in the United States alone. Within three months, Glock had developed a working prototype that combined proven mechanisms and traits from previous pistol design |
| |
| KelTec P50 Blowback Semiauto 5.7x28mm Pistol | |
| It really is quite easy, even if you try to remove the sight from the wrong direction like I had. The front can be replaced with a Glock front sight hex driver while the back can darkpistols.com be swapped out with a small screwdriver. To me the polymer ones feel flimsy and I do question their long term reliability. I’m not a big fan of the captive polymer recoil sprin | |
| |
| Walther PPQ M2 for a first timer? | I am looking to purchase my first firearm... Shooters World is Florida’s largest firearm store, indoor public shooting range, and training [[https://darkpistols.com/top-gun-stores-for-quality-glock-firearms-near-you/|glock 19 for sale]] facility. glock 19 for sale Should I purchase it online or wait for my local gun show in a few weeks? Now I am interested in buying one, and glock 19 for sale would like a recommendation on where should I purchase on |
| For as many polymer framed and/or striker-fired pistols are currently on the market (and there are quite a few!) there is one model which I would give the crown to, hands down and no questions asked. It’s not just a good trigger for a polymer striker-fired pistol, it’s just a really freaking good trigger. Because of the difference in engineering the striker pistols just won’t ever have the same clean feel at the trigger as a hammer-fired weapon. Striker-fired polymer framed pistols…they’re everywhere. | |
| Walther PPQ M2 Review | |
| I’m not going to focus much time on range reports in the Sidearms For Sportsmen column. Walther definitely paid attention to the gripes pistol users have, and they made this pistol very comfortable to shoot. You don’t need NBA hands to fit darkpistols.com around the grip and everything just seems to mold to your palm. One of the biggest standouts of the PPQ M2 is the overall design of the pistol itself. One of the features of the Walther that has had people talking is the trigge | |
