| Both sides previous revisionPrevious revision | |
| sidearms_for_sportsmen:walther_ppq_m2_review [2026/02/27 09:16] – created lyuvalerie | sidearms_for_sportsmen:walther_ppq_m2_review [2026/02/27 11:04] (current) – created elissamcdaniel |
|---|
| The Range Hours | About the Author: Jess- Range Team Member |
| Some sights have been reported to change the point of aim but I’ve outfitted both of mine with Trijicon three dot night sights originally made for the P99 and they’ve been dead-on. On the upside sights for the Walther P99 will fit the PPQ’s and they are by far the easiest sights to replace on any handgun I have ever seen. There’s no divot to protect the paint and I’ve personally had some of these sights get beat up in short order. Most of the PPQ’s come with some really flimsy sights which have three white dots painted right on the trailing edge. All of the newer pistols feature polygonal rifling, though I have seen an earlier M2 with more traditional land and groove rifling. After putting hundreds of rounds through other guns I am still completely floored when I go back to shooting a PPQ. | The Q4 Tac comes standard with a threaded barrel, an adjustable rear sight and fiber optic front sight and is complete with an optic mount. There’s the PPQ SC, their sub-compact model with a greatly reduced grip length and half an inch shaved Walther PPQ M2 off of the standard 4″ barrels. For those who prefer a thumb button style mag release there is the PPQ M2 model, which can easily be switched out for left or right handed us |
| Walther PPQ M2 for a first timer? | |
| You’ve probably disliked plastic framed pistols since you first saw them. One final point of consideration is how well these pistols will hold up with time, use, and exposure to the elements. The Q4 and Q5 models are spared from the ‘low-end’ windage adjustable only sights and Walther’s website has a version of the M2 listed with ‘W/XS F8 night sights’ which look to be a major improvement. Clear the pistol then drop the striker by pulling the trigger. It is what every striker-fired pistol strives to b | |
| |
| |
| Some sights have been reported to change the point of aim but I’ve outfitted both [[https://darkpistols.com/choosing-between-compact-and-full-size-pistols-whats-best-for-you-in-2025/|Walther ppq 9mm for sale]] of mine with Trijicon three dot night sights originally made for the P99 and they’ve been dead-on. There’s no divot to protect the paint and I’ve personally had some of these sights get beat up in short order. Most of the PPQ’s come with some really flimsy sights which have three white dots painted right on the trailing edge. All of the newer pistols feature polygonal rifling, though I have seen an earlier M2 with more traditional land and groove rifling. The Q4 Tac comes standard with a threaded barrel, an adjustable rear sight and fiber optic front sight and is complete with an optic mount. Pull the slide back slightly then pull down on a tab just in front of the trigge | You’re probably old enough to still prefer a steel framed gun. And let’s go ahead and call a spade a spade; polymer means plastic. I would encourage anyone from new shooters to experienced to give one a try here with us at the Range of Richfield. Walther PPQ M2 I sincerely hope that these guns see an increase in third party support as they absolutely deserve the recognition. The predecessor to the PPQ 22 is the P22, a pistol which seems to have a mixed history of its own. The ergonomics and controls are all the same, but the 22 model does not have a removable back pane |
| |
| |
| Whatever engineering feat Walther undertook to create this trigger had been worth the trouble. But there is so much more to this gun than looking incredible in a mirror. Something which was comfortable, easy to use, not too expensive, and (this is a big thing for me and my budding OCD-ness here) had symmetrical controls. Get the top Handguns stories delivered right to your inbox. Federal's new.30 Super Carry pistol cartridge offers the equivalent of 9mm Luger performance with recoil and muzzle blast com Springfield's XD-M Elite 3.8 Compact OSP 10mm pistol is the perfect carry companion whether you're facing two- or four-legged | Some sights have been reported to change the point of aim but I’ve outfitted both of mine with Trijicon three dot night sights originally made for the P99 and they’ve been dead-on. On the upside sights for the Walther P99 will fit the PPQ’s and they are by far the easiest sights to replace on any handgun I have ever seen. There’s no divot to protect the paint and I’ve personally had some of these sights get beat up in short order. Most of the PPQ’s come with some really flimsy sights which have three white dots painted right on the trailing edge. All of the newer pistols feature polygonal rifling, though I have seen an earlier M2 with more traditional land and groove rifling. After putting hundreds of rounds through other guns I am still completely floored when I go back to shooting a PPQ. |
| Pistol-Caliber Carbi | Let’s Get the Story Straight: What you need to know if you decide to Conceal & Carry |
| | I don’t know how they did it, and I really don’t care, but the Walther’s trigger is leaps and bounds ahead of the pistol I carried in the field. Striker-fired pistols have always had one drawback; the trigger. In the accuracy department, the Walther PPQ M2 should outperform most pistols in its class. The sights won’t rust because they’re polymer as is Walther PPQ M2 the pistol’s frame so nothing to really worry about there. In the field I carried a polymer framed duty pistol for nine years. |
| | Walther PPQ M2 Revi |
| |
| |
| You’ve probably disliked plastic framed pistols since you first saw them. One final point of consideration is how well these pistols will hold up with time, use, and exposure to the elements. The Q4 and Q5 models are spared from the ‘low-end’ windage adjustable only sights and Walther’s website has a version of the M2 listed with ‘W/XS F8 night sights’ which look to be a major improvement. Clear the pistol then drop the striker by pulling the trigger. It is what every striker-fired pistol strives to b | My test pistol had the same excellent trigger as the one I tried at the gun store. Unfortunately, the engineers at Walther took a page out of the Glock design book, as the PPQ comes with polymer 3-dot sights. The ergonomics and controls are all the same, but the 22 model does not have a removable back panel. The point of impact is above the front sight on the .22 model, a matter which has thrown me for quite the loop for the first couple of range sessions. There’s a spring-loaded plunger and a small click-adjustable screw for windage and the rear sight falls right out. |
| | Guns & Ammo |
| | It really is quite easy, even if you try to remove the sight from the wrong direction like I had. The front can be replaced with a Glock front sight hex driver while the back can be swapped out with a small screwdriver. To me the polymer ones feel flimsy and I do question their long term reliability. I’m not a big fan of the captive polymer recoil spring. |
| | Taurus TX22 Competition .22 LR Match Pistol: Revi |
| |
| |
| Pull the slide back slightly then pull down on a tab just in front of the trigger. Ergonomics are another field which the PPQ scores top of its class. This is the only stock trigger which has managed to catch me off guard once while firing off-hand. From there it’s right back to needing just that teeny bit of encouragement to fire again. The reset is so short that by the time you can think about it the darn thing’s already clicked back into place with a tactile and audible repor | I own one of these as well and to be honest it’s given me a lot of trouble. It really is quite easy, even if you try to remove the sight from the wrong direction like I had. There’s a spring-loaded plunger and a small click-adjustable screw for windage and the rear sight falls right out. The front can be replaced with a Walther PPQ M2 Glock front sight hex driver while the back can be swapped out with a small screwdrive |
| |
| |
| Smith & Wesson is chambering its excellent Walther ppq 9mm for sale M&P 2.0 pistol in 10mm Auto, and the result is a gun with high capacity and enough Here is what handgun hunters ca It also forces you to get your finger off the trigger during mag changes, which is a good habit to get into. While this sounds awkward and slow, in actuality I found it was nearly as quick as hitting a traditional mag release with my thumb, and probably with practice it would be just as fas | There are several different versions of this pistol currently available. Some models can be Walther PPQ M2 found in various Cerakote finishes too. If you’ve ever field-stripped a Glock or Canik then you know exactly what to expec |
| |
| |
| You’re probably old enough to still prefer a steel framed gun. And let’s go ahead and call a spade Walther ppq 9mm for sale a spade; polymer means plastic. I would encourage anyone from new shooters to experienced to give one a try here with us at the Range of Richfield. I sincerely hope that these guns see an increase in third party support as they absolutely deserve the recognition. The predecessor to the PPQ 22 is the P22, a pistol which seems to have a mixed history of its own. The ergonomics and controls are all the same, but the 22 model does not have a removable back pane | The trigger on this pistol is so fantastic that it’s the foundation for the very name of the series. The [[https://swfconsultinggroup.com/question/review-walther-ppq/|Walther PPQ M2]] is a "definite buy" for someone looking for a reliable, accurate, capable and durable defensive pistol. This can affect the accuracy of a pistol, but it shouldn’t prevent a shooter from being, at the very least, practically accurate. The rest of the firearm resisted the elements pretty well but the sights, we found, were not coated. I want something I don’t need to wipe down with oil every time I Walther PPQ M2 handle it. Since I’m no longer "on the job," I’ll tell you that I don’t carry a spare magazine on me when I carry a pisto |
| |
| |
| I had been searching the market for some time for a proper ambidextrous nine millimeter pistol. After seeing the groupings I knew that I had to have one of these pistols. S&W MP, Sig 320, and the XD, but when the salesman handed me the PPQ in .45 caliber, I immediately felt like this was the perfect gun. Took a swing to Cabela’s yesterday, and handled a few guns. To get started, click the link below to visit mymagnow.com and learn how to access your digital magazine. This means you have the option Walther ppq 9mm for sale to read your magazine on most popular phones and tablet | I own one of these as well and to be honest it’s given me a lot of trouble. It really is quite easy, even if you try to remove the sight from the wrong direction like I had. There’s a spring-loaded plunger and a small click-adjustable screw for windage and the rear sight falls right out. The front can be replaced with a Glock front sight hex driver while the back can be swapped out with a small screwdrive |
